| From | Message |
Sean_T
Dodge Dakota
JOIN HERE
11/30/2010
06:55:15
|
 Subject: Only high beams work
IP: Logged
Message:
So I've got a strange issue. It happen a while ago that my head
lights (low beams) went out and only the high beams now work. The
bulbs are fine. Any thoughts on where I should start?
|
other bill
Dodge Dakota
JOIN HERE
12/01/2010
15:40:02
| RE: Only high beams work
IP: Logged
Message:
Fuse?
Hi-Lo switch?
|
Dan M
Dodge Dakota
JOIN HERE
12/01/2010
23:01:34
| RE: Only high beams work
IP: Logged
Message:
common problem with rams, it's usually the multifunction switch (one on steering wheel that turns on high beams).
-Dan M
|
Sean_T
Dodge Dakota
JOIN HERE
12/04/2010
01:16:24
| RE: Only high beams work
IP: Logged
Message:
Fuses are good.
I'll pull the multifunction switch and check the pins to see whats
going on.
I should mention that I was having some weird electrical issues
before this where the instrument lights would go out and and the
radio and indicators wouldn't work until I stopped the engine and
restarted. It was an intermittent problem that would only happen a
few time s a year.
|
mario
Dodge Dakota
JOIN HERE
12/04/2010
10:41:54
| RE: Only high beams work
IP: Logged
Message:
TCM
|
Sean_T
Dodge Dakota
JOIN HERE
1/06/2011
04:43:42
| RE: Only high beams work
IP: Logged
Message:
All the problems I'm having do seam to go with a faulty central
timing module. How do I go about finding the part number to order
a new one? Is it as simple as pulling the unit out and reading the
sticker?
2001 QC 4x4 4.7
|
Rick
Dodge Dakota
JOIN HERE
1/16/2011
12:59:13
| RE: Only high beams work
IP: Logged
Message:
I know for certain the hilo switch on my 99 dakota's
multifunction switch is at fault. It clicks from
low to high fine, but it won't click back from high
to low properly. I can pull out the multifunction
switch easily but can I take it apart and find (and
fix) the broken or misplaced switch?
|
Dak99Owner99
Dodge Dakota
JOIN HERE
1/17/2011
17:02:58
| RE: Only high beams work
IP: Logged
Message:
Its your switch, I just replaced mine the part is between 30 to 50 bucks depending on your dimmer and fog light setup. It took me about 10 minutes to replace mine, its two harness plugs. About the easiest repair i have had to do on my truck yet.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
