| From | Message |
Dak1999
Dodge Dakota
JOIN HERE
5/11/2010
18:46:06
|
 Subject: Electric Break Controller
IP: Logged
Message:
Has anyone here put an electric break controller on their dakota. I have a 1999 with a 318. I am towing a 7k GVW trailer loaded to about 5k. It has tandem axles with electric breaks and I would like to make them start working for me.
|
Chelsea
Dodge Dakota
JOIN HERE
5/13/2010
09:10:49
|  RE: Electric Break Controller
IP: Logged
Message:
It's brakes. B-R-A-K-E-S.
If your pickup has breaks, it needs to be fixed.
If it has brakes, then it can stop when you want it to.
Damn hοmοphones really mess you guys up, huh?
|
other bill
Dodge Dakota
JOIN HERE
5/13/2010
11:32:12
| RE: Electric Break Controller
IP: Logged
Message:
If your rig came with the tow package, it is pre-wired (has a pig tail under the dash) for a controller to plug into...assuming you are already running a seven pin connector.
If not you will need a universal kit applicable to the controller you purchase
just an example site:
http://www.hitchcorner.com/brake-controls.htm
|
Dear Troll
Dodge Dakota
JOIN HERE
5/13/2010
14:02:50
|  RE: Electric Break Controller
IP: Logged
Message:
If I wanted your info I would have ask for it.
|
Dak1999
Dodge Dakota
JOIN HERE
5/13/2010
16:50:52
| RE: Electric Break Controller
IP: Logged
Message:
Thanks other bill I have the tow kit and I found the connector behind the e-brake (<-- all for you Chelsea) pedal. This should be easy thanks for pointing me in the correct direction.
|
Chelsea
Dodge Dakota
JOIN HERE
5/20/2010
23:27:48
| RE: Electric Break Controller
IP: Logged
Message:
That wasn't hard, was it?
Now pass it along to this idiot:
http://www.dodgedakota.net/boards/gen/10001.html
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
