Forums
Forum Tools
|
 |
01:29:40 - 12/20/2024
General Dakota Board
| From | Message |
messenger1361
Dodge Dakota
JOIN HERE
6/14/2009
20:32:39
|
 Subject: No clutch resistance
IP: Logged
Message:
I have zero clutch resistance , There is plenty of fluid in resevoir, Any suggestions would be nice.2001 dodge dakota 5speed
|
wow
Dodge Dakota
JOIN HERE
6/15/2009
11:52:31
|  RE: No clutch resistance
IP: Logged
Message:
Check to see if the clutch throwout fork is moving. The slavecylinder is attached to it down at the bellhousing. If the slave is moving the fork-you have a pressureplate failure. If the fork does not move-you have a slave/or clutch mastercylinder failure. If the seals have failed, the fluid will just move around the pistons and you will not get pressure, but no external leaks. Prime failure point is the slave, followed by the master, then the pressure plate. See what moves or doen,t move.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
