Forums
Forum Tools
|
 |
00:15:55 - 12/20/2024
General Dakota Board
| From | Message |
dakuda
Dodge Dakota
JOIN HERE
6/04/2009
22:31:06
|
 Subject: just cerious
IP: Logged
Message:
i have a 95 dodge dakota ext cab, 5.2 crate motor with 10 000 on it, and i also have a 2000 dakota quad cab, now i am have ing a hard time getting rid of my 95 because it it so asowme, but my cab mounts are done, so i want to see if it is possible to put my 2000 body on my 1995 frame, i really think not but what the hell if you don not ask you do not know,
rember if your not dodging your doging
Dakuda
|
other bill
Dodge Dakota
JOIN HERE
6/05/2009
11:15:17
|  RE: just cerious
IP: Logged
Message:
Measure...measure...measure.
Measure the distance between body mounts...
Measure distance between body mounts and wheel openings...
Measure (compare) widths/ lengths of the two frames...
If it does not bolt right up, and you 'really' want to do this, you can have the mounts on the frame re-located to match up to the mounts on the `00 cab.
When you say the cab mounts are done, are you referring to the rubber pieces, or where the bolts acually go into the cab. I would think you could replace the rubbers (Heh...he said, "rubbers") and keep the original cab.
Another Option would be to get a cab from a salvage yard. They could probably tell you what to do as far as VIN #s also.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
