| From | Message |
Dan M
Dodge Dakota
JOIN HERE
11/28/2008
23:22:39
|
 Subject: Aux lighting switch mounting
IP: Logged
Message:
Anyone here install any after market lighting and find a nice clean install point for the switch?
I added 2 sets of off road lights and wired them both to a single switch then I added a set of lights under the bumper facing backward running off another switch. I picked up a 2 port rocker switch assembly at my local auto parts store.
how did ya'll mount the switch?
On my 02 QC 4x4 there's a little hole in the dash to the right of the radio under the heating/ac vent. I took the dash apart and unscrewed that and for the time being have the switch just resting in there. I am not liking just screwing the switch into that but I'm not sure how i can make it look nice and neat.
- Dan M
|
eddy
Dodge Dakota
JOIN HERE
12/07/2008
20:39:32
| RE: Aux lighting switch mounting
IP: Logged
Message:
Mine are just slightly lower than the steering wheel in the flat part of the dash before it starts to curve. The switch for the front lights is on one side, the switch for the rears on the other.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
