| From | Message |
leverenz
R/T
 
5/27/2008
15:04:42
|
 Subject: frunt bumper
IP: Logged
Message:
ok, 01 R/T CC. the front bumper is sagging like a mo-fo. the front of it is as it should be but the rear of the front bumper has sagged like 1.5". i try to pull up on it but it wont budge. i know this can happen because i have seen three or four daks around here that have the same stinkin problem. anyonke know whats up or how to fix.
~BIG J~
chi-town whats goin' on?
|
MacDonald
Dodge Dakota
JOIN HERE
5/27/2008
21:42:56
|  RE: frunt bumper
IP: Logged
Message:
Cows.
Cows like to sit on Dakota bumpers.
Makes the bumpers sag over time.
Turn them upside down, and after a while they will be straight again.
|
Joey
Dodge Dakota
JOIN HERE
5/28/2008
14:08:13
| RE: frunt bumper
IP: Logged
Message:
dam lol lotta dumbasses on this site who cant give a normal answer.....
anyways, heres your fix:
go under your truck and look on the inside of the bumper and you will see 2 brackets. one on the left side of the truck and one on the right. You will be able to see some screws in there where when u unscrew them almost all the way you can adjust the bumper so that it is no longer slanted and is level with the body of the truck. Its hard to explain but there is adjustability there u just have to get underneath and look for it. good luck.
|
GreyDak
Dodge Dakota
JOIN HERE
5/28/2008
19:17:28
| RE: frunt bumper
IP: Logged
Message:
You know, Joey. If he ain't smart enough to look at the bumper attachment without instructions, maybe the cows explanation is the better way to go.
|
English
Dodge Dakota
JOIN HERE
5/28/2008
22:10:57
| RE: frunt bumper
IP: Logged
Message:
frunt?
FRUNT?!
Geez.
I see someone paid attention in school.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
