Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
00:41:02 - 12/20/2024

General Dakota Board
FromMessage
garth
Unregistered
 Email

2/14/2001
10:33:02

Subject: TEST ..... V6 5 Speed
IP: Logged

Message:
First thing the engine needs to be cold.
On a flat road with few bumps, start to excellerate slowly, crossing over the 2400 rpm area. The speed should hesitate for a brief second and then continue to excellerate again. It would almost seem as if you had a miss or bad plug.

Test this for yourself and post your replies when it happens.

See my other posts about "V6 5 Spd stumbles and backfires" for more info.

Garth
2000 QuadCab 4x4 V6 5 Spd



intense99dak
Gen III
 Email User Profile

2/14/2001
20:02:35

RE: TEST ..... V6 5 Speed
IP: Logged

Message:
I had some spare time today and tried your test. Unfortunately I was unable to duplicate your symptoms. This might be a good thing, though.

My Dakota's ignition has been upgraded consisting of a MSD 6A, Accel coil, Taylor plug wires, brass contact cap & rotor and Autolite 3923 spark plugs.

You might want to try changing your spark plugs (Autolites 3923 are like $0.90 apiece) and see if this helps. If it doesn't (or helps a little), you might want to consider upgrading your ignition. Other benefits to it are better mpg and power.

Chuck Robbins
'99 Dakota Sport
www.intense99dak.com

garth
Unregistered
 Email

2/15/2001
10:10:18

RE: TEST ..... V6 5 Speed
IP: Logged

Message:
Chuck ........ see if you can tell as many people as you can about this test, and tell them to give it a try. It only seems to be the 2000 - 2001 V6's with a 5 speed.

Garth
2000 QuadCab 4x4 V6 5 Spd



intense99dak
Gen III
 Email User Profile

2/15/2001
14:59:26

RE: TEST ..... V6 5 Speed
IP: Logged

Message:
Garth - Have you posted to the DML about this yet? I think I remember seeing something about it, but can't be sure. If you haven't let me know and I'll do some cutting & pasting and make a post to the DML.

Chuck Robbins
'99 Dakota Sport
www.intense99dak.com

garth
Unregistered
 Email

2/15/2001
15:28:57

RE: TEST ..... V6 5 Speed
IP: Logged

Message:
Chuck ........ I can't do it from the computer that I am at right now, I don't have access to my email account. I don't think that I put it on to the DML list, if you could do this it would be great. I sure wish the DML list was as easy to use as this forum is. I wish they would give it some thought to switching to this type of system.

Garth
2000 QuadCab 4x4 V6 5 Spd



intense99dak
Gen III
 Email User Profile

2/15/2001
17:15:06

RE: TEST ..... V6 5 Speed
IP: Logged

Message:
Just posted your symptoms and test to the DML. Hopefully something will come up and you can start enjoying your Dakota again.

Chuck Robbins
'99 Dakota Sport
www.intense99dak.com

Garth
Unregistered
 Email

2/17/2001
11:26:07

RE: TEST ..... V6 5 Speed
IP: Logged

Message:
Chuck thanks for posting the info on the DML list. Now if more people would only take the test.

Garth
2000 QuadCab 4x4 V6 5 Spd



Ian Pendergrass
Gen III
 Email User Profile

2/17/2001
23:16:18

RE: TEST ..... V6 5 Speed
IP: Logged

Message:
Mine also does this. I hope to have a MSD6 installed this week. If it fixes it I will let you know.

2000 Quad Cab 3.9L V6 2/4 Drop flowmaster

dak 2
Gen III
 Email User Profile

2/18/2001
10:01:09

RE: TEST ..... V6 5 Speed
IP: Logged

Message:
Tried it several times on mine no problem but
mine had a flash upgrade about 1.5 weeks back.

Y2K DAK,CC,3.9L,5Spd, OS/2 keeps going & going & going

Ian Pendergrass
Gen III
 Email User Profile

2/24/2001
19:08:59

RE: TEST ..... V6 5 Speed
IP: Logged

Message:
Just got done installing MSD6, 8.5 MSD wires, 3923 Autolites, and SS blaster coil. The first run threw town and my truck still stumbles at 2400 rpm when its cold once it warmed up it ran great.

Anybody have any more ideas

2000 Quad Cab 3.9L V6 2/4 Drop flowmaster

Bernd
GenIII
 Email User Profile

2/24/2001
21:13:59

RE: TEST ..... V6 5 Speed
IP: Logged

Message:

This stumble...does if fall flat on its face or just "hiccup"?

Bernd D. Ratsch
1997 Dodge Dakota SLT
Supercharged w/Nitrous

Garth
Unregistered
 Email

2/25/2001
13:04:40

RE: TEST ..... V6 5 Speed
IP: Logged

Message:
on my truck is just a hiccup, I'm sure its the same on all of them

Garth
2000 Quadcab 4x4 V6 5 Spd



Ian Pendergrass
GenIII
 Email User Profile

2/25/2001
14:14:18

RE: TEST ..... V6 5 Speed
IP: Logged

Message:
Just a slight pause

2000 Quad Cab 3.9L V6 2/4 Drop, flowmaster, 3923 Autolites, MSD6,

Don
Dodge Dakota
JOIN HERE
 Email

10/05/2003
01:16:31

RE: TEST ..... V6 5 Speed
IP: Logged

Message:
Garth,
I have a 2000 v6 5 speed,exact same problem when it's cold.I have the MSD 6a,MSD coil, Tailer wires new plugs, you name it , it still does it at 2400 rpm.I hope that we can find a solution, Damler Chrysler should be looking after this.
I thought it was just me.

Don from Vancouver Canada



latexsolarbif
Dodge Dakota
JOIN HERE
 Email

12/01/2003
20:31:20

RE: TEST ..... V6 5 Speed
IP: Logged

Message:
my suggestion is to let your engine warm up for a few minutes before you drive away.I do this every day and have never experienced the problem you speak of.The owners manual says to let the engine warm up.I'd hate to even imagine the problems associated with start-and-go engine abuse.Consider the fact that even a person does not just wake up and go full throttle.You have to "get going" first before you get going.Don't expect too much from a machine.As close as it(dak) is to perfect,there's no such thing



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.