| From | Message |
Daniel D
GenII
 
2/14/2001
00:41:00
|
 Subject: Throttle Body
IP: Logged
Message:
I am using a stock V8 TB on a 95 V6. I had heard somewhere that i might have too much air flow for this small of a motor. Is this true?
|
Bernd
GenIII
2/14/2001
12:08:27
| RE: Throttle Body
IP: Logged
Message:
Nope...not at all. (Unless you decide on a 50mm or higher TB.)
The stock V8 TB's are around 47mm and the modified V6 TB's are around 46-46.5mm. The '98 V6 TB's are actually 42mm and when a 48mm was installed, the trucks performance was very noticeably increased.
Bernd D. Ratsch
1997 Dodge Dakota SLT
Supercharged w/Nitrous
|
Daniel D
GenII
2/15/2001
14:20:03
| RE: Throttle Body
IP: Logged
Message:
I had went to Quick D's site. It showed the V6 to be 42 and 5.2 to be 50mm. I got the TB off a 94 318. some say it'd bog when i hit it from a stand still, which it does to a certain extent. Thanks for the info
|
Bernd
GenIII
2/16/2001
14:34:22
| RE: Throttle Body
IP: Logged
Message:
The V6's came with whatever Dodge decided to put on that year V6. The '98 models use a 42mm, my '97 had a 46mm (from the factory) and a 48mm really wakes up the V6. (Flometrics Billet or just a stock V8 TB will be just fine.)
It won't bog unless you're installing a 50mm or larger TB on the V6 without any substantial modifications to the engine.
Bernd D. Ratsch
1997 Dodge Dakota SLT
Supercharged w/Nitrous
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
