From | Message |
dan440 Dodge Dakota JOIN HERE
10/23/2007 16:38:12
|
Subject: Front brake caliper bolt size 2000 RT? IP: Logged
Message: Doing the brakes for the first time on my dakota and there is these rubber things on the caliper bolts so I can not see the bolt but i have tried every socket that fits the hole and tried allen heads to no avail, anyone know what size and type of socket I need to get these off?
Also I saw something in arhives about loosening the bleeder screw when I compress the piston, is this necessary? Will I have to bleed the brakes after?
|
yeti Dodge Dakota JOIN HERE
10/23/2007 17:00:30
| RE: Front brake caliper bolt size 2000 RT? IP: Logged
Message: on mine, it's a torx - 45.
|
dan440 Dodge Dakota JOIN HERE
10/23/2007 17:48:31
| RE: Front brake caliper bolt size 2000 RT? IP: Logged
Message: Thanks, Ill try that one.
|
Epyon Dodge Dakota JOIN HERE
10/23/2007 23:08:03
| RE: Front brake caliper bolt size 2000 RT? IP: Logged
Message: Its also i 9mm bolt/stud
|
dan440 Dodge Dakota JOIN HERE
10/23/2007 23:30:08
| RE: Front brake caliper bolt size 2000 RT? IP: Logged
Message: It actually turned out on mine to be a torx 40
|
Mr.T Dodge Dakota JOIN HERE
10/24/2007 01:22:43
| RE: Front brake caliper bolt size 2000 RT? IP: Logged
Message:
Use a C-clamp and an old brake pad, making sure the clamp is centered with the piston and compress slowly to avoid the piston from cocking to one side in the bore.
On dual piston calipers, compress only one at a time.
Keep an eye on the rubber boot/seal making sure its not being damaged in the process.
Never let the caliper hang by its hose, use some wire to support it while doing the work.
Remove the cap on the master cylinder while you push the piston back in the caliper.
You might have to siphon a bit of brake fluid out to avoid some spilling.
I bleed the brakes once a year or after any brake related work.
Brake fluid can accumulate air & moisture over time and that will reduce its performance.
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|