| From | Message |
josh vincent
Dodge Dakota
JOIN HERE
8/26/2007
15:39:04
|
 Subject: adjusting cluch
IP: Logged
Message:
i have a 2002 dakota with a 3.9l and a 5-speed. i had the cluch and all the bearings replaced this winter and now my clutch is acting up. when the tranny warms up the clutch will slip bad, i changed the fluid but it still does it. how can i adjust or bleed the clutch??
|
Shoe
GenIII
8/26/2007
16:00:04
| RE: adjusting cluch
IP: Logged
Message:
We use a hydraulic clutch system, so you cannot just adjust it. As far as bleeding them, usually they have a bleeder valve on the slave cylinder.
Finally... a V8. '01 Dodge Dakota RC, 4.7, 5-speed, 3.92 LSD. = R/T Killer.
well at least a stock one
|
josh vincent
Dodge Dakota
JOIN HERE
8/26/2007
16:29:49
| RE: adjusting cluch
IP: Logged
Message:
where is the slave cylinder located??
|
Epyon
Dodge Dakota
JOIN HERE
8/26/2007
19:39:22
| RE: adjusting cluch
IP: Logged
Message:
Slave Cylinder is on the side of the transmission going into the bellhousing. Drivers side
|
josh vincent
Dodge Dakota
JOIN HERE
8/28/2007
18:28:40
| RE: adjusting cluch
IP: Logged
Message:
is it the little black thing????
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
