| From | Message |
jjj
Dodge Dakota
JOIN HERE
8/23/2007
17:30:13
|
 Subject: RE: LOOKING FOR ROCKERS
IP: Logged
Message:
Cool, just remember duration (overall and at 0.050") is also slightly increased.
Often there is clearance but some of the newer engines are made so close that there might not be.
|
.boB
Dodge Dakota
JOIN HERE
8/23/2007
22:14:11
| RE: LOOKING FOR ROCKERS
IP: Logged
Message:
The change in duration is pretty small, like 1-2*.
The stock cam is pretty weak in both areas - not much lift or duration. So any improvement is noticable.
JJJ is exactly right. It's a ratio, not an exact measurement. Notice I said one side is 1.7 "measures" of the other. I didn't actually measure mine before installing, so I can't say if it was 1" or not. A Ford 1.6 rocker arm measures about 7/8" on the short side.
|
clint282cc
Dodge Dakota
JOIN HERE
8/24/2007
11:56:50
| RE: LOOKING FOR ROCKERS
IP: Logged
Message:
well i did measure mine. and it is 1" on the short side and 1.7/1.6 on the long.
|
| | <<Original Post <<Previous Page P 2 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
