Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
00:46:28 - 12/20/2024

General Dakota Board
FromMessage
K~Rod
Dodge Dakota
JOIN HERE
 Email

8/08/2007
09:16:28

Subject: Throttle Body
IP: Logged

Message:
My dealership said I have a little carbon build up in my throttle body and wanted to charge me $200+ to clean it for me! I was wondering how easy is it to clean this area? I know they sell throttle body spray cleaners but, is that all it is to it?...spray & wipe?

'02 Dakota, 3.9L, 2WD.



clint282cc
Dodge Dakota
JOIN HERE
 Email

8/08/2007
10:57:12

RE: Throttle Body
IP: Logged

Message:
pretty much. go for it. make sure you dont drop anything in the intake lol



K~Rod
Dodge Dakota
JOIN HERE
 Email

8/08/2007
11:15:11

RE: Throttle Body
IP: Logged

Message:
....appreciate it!... Do I need to worry about any of the spray residue going into the intake area??



.boB
Dodge Dakota
JOIN HERE


8/08/2007
12:35:09

RE: Throttle Body
IP: Logged

Message:
You'll find there's a lot of gunk on the bottom of the throttle body. You really need to remove it for a good cleaning. Cleaning the top surfaces that you can see really won't help you much.

Removing the TB isn't that big of a deal. No special tools required. Just be carefull with the plastic bits, as they can get brittle over time.



Shoe
GenIII
 User Profile


8/08/2007
13:15:41

RE: Throttle Body
IP: Logged

Message:
DO NOT REUSE THE STOCK GASKET! They are cheap and do not cost that much, so please buy a new one. Not too hard to clean. I just removed it. Took all the sensors out and cleaned it with Mean-Green and a toothbrush.

Finally... a V8. '01 Dodge Dakota RC, 4.7, 5-speed, 3.92 LSD. = R/T Killer.
well at least a stock one

K~Rod
Dodge Dakota
JOIN HERE
 Email

8/08/2007
13:45:45

RE: Throttle Body
IP: Logged

Message:
THANKS GUYS FOR ALL THE ADVICE, REALLY APPRECIATE IT!!!!....will give it a shot this weekend.



97dak
Dodge Dakota
JOIN HERE


8/12/2007
21:09:24

RE: Throttle Body
IP: Logged

Message:
Will the throttle cable from a 97 3.9 fit a throttle body from a 318?



GB2000
GenIII
 User Profile


8/12/2007
23:56:51

RE: Throttle Body
IP: Logged

Message:
Depends on the linkage



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.