| From | Message |
97dak
Dodge Dakota
JOIN HERE
7/27/2007
18:13:11
|
 Subject: Crank Pulley
IP: Logged
Message:
Anyone had a problem with the crank pulley sliding back(towards the block) and causing it to keep shredding belts? I put a new harmonic balancer on it(which helped a little), but its still not lined up with the rest of the pulleys. BTW, its a 97 3.9 liter.
|
Forseti
Dodge Dakota
JOIN HERE
7/27/2007
19:55:33
| RE: Crank Pulley
IP: Logged
Message:
If the crank pulley and the harmonic is bolted tight to the crank and you can see it sliding in and out of the block a little then it sounds like your thrust bearing might be shot ..... time for a overhaul on the engine ....
|
97dak
Dodge Dakota
JOIN HERE
7/30/2007
12:56:30
| RE: Crank Pulley
IP: Logged
Message:
Got it figured out. Looked at the crank pulley, and it was more forward than I thought. The cause of my belt throwing was my power steering pump pulley was coming off the shaft.
|
chris
Dodge Dakota
JOIN HERE
8/07/2007
00:07:32
|  RE: Crank Pulley
IP: Logged
Message:
im having a problam with my dodge dakota 3.9 making this sound, almost like valves but not, replaced water pump hoping thats what it was. Wroung. iv replaced everything except the harmonic balancer. the motor also kind of jumps a little while its idling. i need help. its driving me insane. any advice would be great
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
