Forums
Forum Tools
|
 |
01:17:38 - 12/20/2024
General Dakota Board
| From | Message |
Anthony
Dodge Dakota
JOIN HERE
6/03/2007
18:18:56
|
 Subject: need clutch master cyl help
IP: Logged
Message:
I cant find the plastic line that goes between master and slave clutch cyl's. I burnt mine on the exhaust manifold. The truck is a` 94 dakota sport 3.9L. Allthe places i've gone to only sell either cyl or complete assy. I tried using tractor trailer air brake line, but get an air leak in the lines. any help or tip is appreciated.
thanks
|
OBIO3
Dodge Dakota
JOIN HERE
6/04/2007
21:37:21
| RE: need clutch master cyl help
IP: Logged
Message:
Your pretty much limited to a clutch line or brake line. I would be packing the old line with me and hitting parts stores and other dealers. Ford, Chev, Jeep, you name it. someone has a replacement line that will work. Long as it is long enough with proper ends you can make it work fine. Unless your smarter then me, lol, Don't take much, the real fun is trying to bleed it. Don't try to use metal line unless you can use a wheel cylinder hose connected to it for movement. Universal metal line that you bend to shape yourself plus a short rubber brake cylinder hose should do the trick if need be.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
