| From | Message |
Tim
Dodge Dakota
JOIN HERE
4/13/2007
08:13:39
|
 Subject: Grease zerk 02 Dakota
IP: Logged
Message:
I have a 2002 Quad cab 4x4 and I am wondering where my grease zerks are to grease the front end... I cant find any. Any info? Thanks guys
|
daddio
Dodge Dakota
JOIN HERE
4/13/2007
08:33:28
| RE: Grease zerk 02 Dakota
IP: Logged
Message:
not sure about a 4x4 but, 4x2 there are none. DC says it's what we the customer wanted. i can tell you, nobody asked me about it.
|
PETE
Dodge Dakota
JOIN HERE
4/13/2007
10:13:28
| RE: Grease zerk 02 Dakota
IP: Logged
Message:
none in my 02 permanent lifetime grease. Only way to get grease is to drill and tap insert zerk fitting , but then you take a chance metal shavings from drilling your hole cotaimanted your ball joints and promote wear to lead to failure.Other option check dealer with your VIN# at hand see if yours is included in recall they have my fathers Durango did and relaced all 4 of them Good Luck!!
|
Manny
Dodge Dakota
JOIN HERE
4/13/2007
11:49:33
| RE: Grease zerk 02 Dakota
IP: Logged
Message:
There are no grease zerks for the suspension or drive train on our Dakotas.
|
RadioMan
Dodge Dakota
JOIN HERE
4/14/2007
07:43:06
|  RE: Grease zerk 02 Dakota
IP: Logged
Message:
No grease zerts ='s upper ball joint callback.
Must have been a collage grad that majored in
bean counting..
He lost on that one... I bet DC kicked his butt
out the door.
|
jjj
Dodge Dakota
JOIN HERE
4/16/2007
08:57:41
| RE: Grease zerk 02 Dakota
IP: Logged
Message:
I use one of the needles, puncture the boot and fill it full of grease.
No ball joint problems doing it that way in my experience.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
