| From | Message |
Xrated
Dodge Dakota
JOIN HERE
1/04/2007
12:23:05
|
 Subject: Ignition fuse problem
IP: Logged
Message:
Hi all , im curently having a problem with my 92 318 dak , its blowing the ignition fuse under the hood , as soon as i want to start it , ive already replaced it 3 times and i tried a 50amp one too and it still blows. Is there any common problems that can cause this? Thanks
|
Marv
Dodge Dakota
JOIN HERE
1/04/2007
14:22:01
| RE: Ignition fuse problem
IP: Logged
Message:
More info needed.
Does the fuse blow when you turn the key to the RUN position, or when you turn the key to START.
|
daddio
Dodge Dakota
JOIN HERE
1/04/2007
15:01:24
| RE: Ignition fuse problem
IP: Logged
Message:
have you done any modifications to the ignition system?
by the way, they put a certain size fuse in a circuit for a reason. never ever install a fuse rated higher than the circuit is rated for. you're lucky your truck didn't go up in smoke.
|
Xrated
Dodge Dakota
JOIN HERE
1/04/2007
16:59:37
| RE: Ignition fuse problem
IP: Logged
Message:
Its blowing up as soon as i turn the key to the start position , i never modified the ignition system and i tried the 50amp one when it was stalled in the parking lot... I got to start it by bypassing the ignition relay too. This problem started when i tried the carwash... i replaced the fuse and it was okay , but one week later a the fuse blew and fuel pump power cable was cut and we tought the problem was from there but it seems not.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
