| From | Message |
Jay Wingate
Dodge Dakota
JOIN HERE
11/23/2006
16:07:27
|
 Subject: Error code
IP: Logged
Message:
Just got a P1764 Check Engine Light error code when I pulled off the Interstate heading home. Any ideas, I know it's a govenor sensor error but what is required to fix this? Thanks for you help.
|
Marv
Dodge Dakota
JOIN HERE
11/23/2006
17:14:18
| RE: Error code
IP: Logged
Message:
1764 = The Governor Pressure Sensor input is too low.
Check your transmission fluid level lately?
|
Jay Wingate
Dodge Dakota
JOIN HERE
11/23/2006
21:19:51
| RE: Error code
IP: Logged
Message:
Fluid level (ATF4) seems to be right on the mark. Is there anything else to trip that error code. And what can be done to repair it. Thank you.
|
Mark-2
Dodge Dakota
JOIN HERE
11/24/2006
16:05:42
| RE: Error code
IP: Logged
Message:
Well, Jay. It would be ever so nice if we knew what year and which engine and transmission you have. Otherwise we're just guessing.
|
Jay Wingate
Dodge Dakota
JOIN HERE
11/24/2006
22:58:24
| RE: Error code
IP: Logged
Message:
Thanks for replying Mark2. I have a 1999 42re behind a V6. Using ATF4, changed every 35000 miles by the dealership. Any help you can give me would be deeply appreciated. Thanks for your response.
|
Books
Dodge Dakota
JOIN HERE
11/25/2006
12:33:20
| RE: Error code
IP: Logged
Message:
P1764 = Governor pressure sensor voltage too low.
|
Bettle
Dodge Dakota
JOIN HERE
11/29/2006
21:41:06
| RE: Error code
IP: Logged
Message:
What was it that caused that error????
|
Jay Wingate
Dodge Dakota
JOIN HERE
12/02/2006
07:39:25
| RE: Error code
IP: Logged
Message:
Took my truck to the dealer. They said they found a Gonernor Pressure Sensor going bad causing the P 1764 error code. They replaced the sensor, trans fluid (ATF4), and filter. A bit expensive, $460 all together. But it seems to be fine now and will hopfully go many miles more. Thanks for all the help I got.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
