| From | Message |
Mopar318
GenII
8/01/2006
03:28:18
|
 Subject: Can you say Traction??
IP: Logged
Message:
F*cking google ads.
Got me a used set of E/T streets for 100 bucks. They got here friday so I went and got em mounted up. The M/T E/T street are about as close to a full drag slick as you can get. I hoping to greatly improve my 60' time of 2.3. If I can get it down to 2.0, that should be good for another 5/10 in the 1/4.
I did test them out a bit today. 25 psi in em and no warm up and they didnt spin one bit.
Its whats under the hood that counts........
|
DAHEMIKOTA
GenII
8/03/2006
00:27:58
| RE: Can you say Traction??
IP: Logged
Message:
I see the 12 second runs coming..Dan
|
mopar318
GenII
8/03/2006
01:23:53
| RE: Can you say Traction??
IP: Logged
Message:
Repost since the google ads were blocking.
Got me a used set of E/T streets for 100 bucks. They got here friday so I went and got em mounted up. The M/T E/T street are about as close to a full drag slick as you can get. I hoping to greatly improve my 60' time of 2.3. If I can get it down to 2.0, that should be good for another 5/10 in the 1/4.
I did test them out a bit today. 25 psi in em and no warm up and they didnt spin one bit.
Oh, And here is a vid I took today, Enjoy!
http://s32.photobucket.com/albums/d48/Mopar318/?action=view¤t=a937f713.flv
|
GraphiteDak
GenIII
8/03/2006
01:33:59
| RE: Can you say Traction??
IP: Logged
Message:
The BOV sounds good LOL!
|
Mopar318
GenII
8/03/2006
12:48:36
| RE: Can you say Traction??
IP: Logged
Message:
I redid my exhaust as well too. I wanted it more of a sleeper and the side exhaust was just a tad bit loud. And looked a little hillbilly. Lol. I welded up a mandrel bend that went over the crossover. Strait to a flowmaster with a dump. Sounds pretty good now.
|
eddy
Dodge Dakota
JOIN HERE
8/03/2006
13:44:35
| RE: Can you say Traction??
IP: Logged
Message:
The worst part with these new frickin google ads is you can't get rid of them. With other similar populs you can click on something in the add to make it go away. With these they usually paste it right over text you want to read and there's no way to make it go away. I've seen them on a few sites.
|
Duh
Dodge Dakota
JOIN HERE
8/03/2006
14:34:06
| RE: Can you say Traction??
IP: Logged
Message:
Say traction. Hell, I can't even spell it.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
