Forums
Forum Tools
|
 |
03:20:53 - 12/24/2024
General Dakota Board
| From | Message |
capone
Dodge Dakota
JOIN HERE
7/25/2006
19:51:55
|
 Subject: Parts for Sale!
IP: Logged
Message:
Hi everyone,
I recently got into an accident with my truck. I'd been working
on it for a while and I've got a ton of performance parts in it
along with a lot of stock parts that are in great shape. I would
repair it, but the frame is too bent to make that possible. So
here is a list of the parts I have along with what I'd like for them.
If you're interested you can send me an email. If you'd like to
make an offer or if you need a part I don't list, then let me know
and I'll see what I can do.
K&N Fuel Injection Performance Kit
Asking $60 Original Price $150
Fits the 3.9, 5.2, and 5.9 engines. This is the entire assemble
and it replaces the air filter and the entire housing. Has been
use for 15,000 miles. I will include their recharger kit to re-oil
the filter. The filter is supposed to last the life of the vehicle.
Hopefully it'll last longer in your truck than mine.
K&N Filter Element
Asking $20 Original Price $50
Fits the 3.9, 5.2, and 5.9 engines. This replaces your air filter
and fits in the stock housing. I only used this for a month and
then I bought the entire kit because it worked so well.
Harland-Sharpe 1.7 Roller Rocker Arms
Asking $200 Original Price $366 (Summit Racing)
A set of 16. Fits the 3.9 (wouldn't use them all), 5.2, and 5.9
engines. This was my favorite mod and produced the most
power. They were only used for 4,000 miles and are in great
shape.
ASP Underdrive 3 Pulley Set
Asking $100 Original Price $150
This includes the crankshaft, water pump, and alternator
pulleys. Fits the 3.9, 5.2, and 5.9 engines. You can use your
original belt. Produced a lot of low end torque for me and I had
no alternator problems.
V8 Throttle Body
Asking $25
I'm aware that those with the V6 engine like to put a V8 TB on to
provide more flow to the intake. If anyone is interested, let me
know.
Heavy Duty Leaf Springs
Asking $50 each Original $90 each
Fits 1986-1996 2wd Dakotas. Rated at 2550lbs and made of
four heavy duty leaves. This increased the payload of my truck
and allowed for better handling, but a bumpier ride.
Bilstein Heavy-Duty Ride Shocks
Asking $150 for all 4 Original $130 (front set) $150 (rear set)
These shocks provide improved handling and stability without
sacrificing ride comfort. They offer super damping ability that
makes them ideal for heavy hauling for occasional off-road use,
while maintaining an exceptional street ride.
MSD 8.5mm Super Conductor Spark Plug Wires
Asking $30 Original $65
These are the self assembled wires. I cut them for a 3.9 V6 and
they work great. Have only been used for 2,000 miles.
Blue Fiberglass Topper
Asking $175
Made for the short bed. Its in good shape, but not new
anymore. It would look good with any truck that is royal blue
like mine, but we put it on my dad's dakota with the new lighter
blue color and it looked good too. It's not a perfect shade of
either, but right between the two.
Thanks for looking through what I've got. I also have a
flowmaster muffler and whatever other stock parts I could pull
off. Let me know what you need and I'll see if its in good shape.
Send me an email. I'm in southeastern wisconsin if any of you
are thinking you'd rather pick up the part instead of shipping it.
- Justin
|
yzeffer
Dodge Dakota
JOIN HERE
7/30/2006
00:15:49
| RE: Parts for Sale!
IP: Logged
Message:
Hey do you still have the K&N cold air intake? Drop me an email at yzeffer@certainty.net Thanks, Dan
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
