| From | Message |
adamklein
Dodge Dakota
JOIN HERE
7/10/2006
15:55:02
|
 Subject: TB Port/Polish
IP: Logged
Message:
I have a 98 3.9 V6 CC.......i dont want to spend a ton of money on a fastman or f & B throttle body. I also dont want to spend time or money trying to reconnect the throttle cable from a stock v8 throttle body. I have decided to try mine myself. I have a good dremel tool and about any attactchment you could want.
So my question is ...
How exactly do you do it?
Are there instructions somewhere?
Or has anyone done it themselves?
Let me know...Thanks!!
1998 Dakota Club Cab 3.9 V6 SLT, K&N Drop in Intake, Tonneau cover, Clear Corners, Tint
Soon To Have: New throttle body, Cold Air Intake, and perhaps exhaust.
|
adamklein27
Dodge Dakota
JOIN HERE
7/10/2006
22:45:35
|  RE: TB Port/Polish
IP: Logged
Message:
does modifying the part that holds the hat on help...i notice it covers the ports...should i dremel that smaller as well if i am going to port and polish them?
|
zzark
*GenII*
7/11/2006
10:31:05
| RE: TB Port/Polish
IP: Logged
Message:
If you search, you can find some pictures to guide you.
One guy on here used a 2 inch flapper wheel to enlarge the bore.
zzark
|
cuzindoug
GenIII
7/11/2006
15:08:28
| RE: TB Port/Polish
IP: Logged
Message:
Yep, as for the "air hat" fastener, that it out, and use a piece of all-thread and bend it twice to adapt. The size you need is 1/4-20 about 4-6 inches long.
If it doesn't fit, force it. If it breaks...well...it needed to be replaced anyway.
|
adamklein
Dodge Dakota
JOIN HERE
7/11/2006
22:03:48
| RE: TB Port/Polish
IP: Logged
Message:
on the air hat fastner ...do i remove it completely? If so where do I attach the all thread? thanks
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
