| From | Message |
Ozz
Dodge Dakota
JOIN HERE
5/07/2006
14:55:01
|
 Subject: Outer tie-rods
IP: Logged
Message:
I am trying to find tie-rod ends for a 01 4x4 with zerk grease fittings, the Napa parts made by Dana are sealed crap with no zerks either.The Napa upper and lower ball joints have grease fittings.
Anyone know if Moog or TRW come with grease fittings?
Thanks
|
Obio3
Dodge Dakota
JOIN HERE
5/07/2006
16:40:11
| RE: Outer tie-rods
IP: Logged
Message:
We have a store here called BEARINGS INC. They have lots of these things in stock and books where they can order from. I've done this in the past when I still had my shop. If you can locate a bearing supply shop in your area take one of yours in as they will need to measure so they can look up the proper item. I did this many times and they never failed me once. Another hint.... Install your own zirks . Not hard to do at all. Just be sure you use THICK AXLE GREASE on the bit to collect all shavings. Practice on a worn out one.
So many problems .... So little time
|
shatto
Dodge Dakota
JOIN HERE
5/07/2006
20:36:33
| RE: Outer tie-rods
IP: Logged
Message:
Amsoil Racing Grease.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
