| From | Message |
zzark
*GenII*
5/03/2006
09:14:25
|
 Subject: Larry and others, re AutoXray scanner
IP: Logged
Message:
I have the 6000 scanner.
I measure the voltage ON the TPS as 0.69
But the scanner shows me a reading of 0.6
Is that a limitation of the scanner or the truck's computer?
Thanks
zzark
|
Maybe
Dodge Dakota
JOIN HERE
5/03/2006
14:59:37
| RE: Larry and others, re AutoXray scanner
IP: Logged
Message:
What did you use to measure the .69 volts?
Does the scanner readout go to two decimal places for voltage measurements?
Maybe the PCU is only giving voltages to tenths of a volt.
|
Obio3
Dodge Dakota
JOIN HERE
5/03/2006
17:36:58
| RE: Larry and others, re AutoXray scanner
IP: Logged
Message:
To add a note. One of the 2 instruments may be calabrated wrong . not uncommon to get differant voltage readings on differant instruments . as an example, I have 3 volt meters. high to low between the 3 there's a differance of .2 volts. not an important issue till doing what your doing .
So many problems .... So little time
|
zzark
*GenII*
5/08/2006
22:56:22
| RE: Larry and others, re AutoXray scanner
IP: Logged
Message:
bump
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
