| From | Message |
Oneten
Dodge Dakota
JOIN HERE
4/27/2006
17:15:36
|
 Subject: t-case
IP: Logged
Message:
i have 2000 dak 4.7L 4x4 quadcab
my tcase keeps sliding out of 2H into neutral....
any ideas??
|
question
Dodge Dakota
JOIN HERE
4/27/2006
18:40:03
|  RE: t-case
IP: Logged
Message:
Is there a body lift involved here?
|
Oneten
Dodge Dakota
JOIN HERE
4/27/2006
21:12:44
| RE: t-case
IP: Logged
Message:
no it's stock all stock
|
cuzindoug
GenIII
4/28/2006
20:49:21
| RE: t-case
IP: Logged
Message:
Double check all your linkages, if they are good, I suspect a worn gear internally (planatary, syncro, etc) or the nylon spacers on the actual shifting mechanism (fingers/fork) are worn causing a clearance/interferance issue, not allowing full engaugement.
If it doesn't fit, you're using the wrong hammer!
|
Shatto
Dodge Dakota
JOIN HERE
4/29/2006
02:45:17
| RE: t-case
IP: Logged
Message:
With enough abuse I think bearings might throw things off enough to do it.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
