| From | Message |
xclrate
Dodge Dakota
JOIN HERE
3/03/2006
09:53:13
|
 Subject: cruise control
IP: Logged
Message:
Hey guys.When I first bought my truck,the cruise didn't work at all.I traced out the vacuum lines and found a broken one near the firewall.Now the cruise engages but it won't hold a steady speed.If I set it at 50 mph,it will surge up to 55 and then go down to about 45,then surge up to 55 again.Anyone have any ideas?Thanks.
Jeff
|
daddio
Dodge Dakota
JOIN HERE
3/03/2006
10:56:33
|  RE: cruise control
IP: Logged
Message:
a small vacuum leak will do that. maybe there is still a small leak you missed.
|
Dan M
Dodge Dakota
JOIN HERE
3/03/2006
11:06:25
| RE: cruise control
IP: Logged
Message:
Test the vac lines with a tester. Pepboys offers one for loaner. I dont think advance/autozone does. At least here in GA.
I purchased one from Harbor Freight for cheap.
- Dan M
|
xclrate
Dodge Dakota
JOIN HERE
3/06/2006
18:55:01
| RE: cruise control
IP: Logged
Message:
Well,I don't have any leaks.What else could it be?
|
OBIO3
Dodge Dakota
JOIN HERE
3/06/2006
20:11:15
| RE: cruise control
IP: Logged
Message:
Don't know where on yours there is a senser that monitors something like the speed or drive shaft or maybe it's on the tranny or dif. I have no idea but I'm guessing this senser is either defective or grounded inproper. Also might just be a lose connection. Reguardless somewhere you have this sensor to monitor your set speed
So many problems .... So little time
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
