Forums
Forum Tools
|
 |
00:19:29 - 12/20/2024
General Dakota Board
| From | Message |
doug
Dodge Dakota
JOIN HERE
2/15/2006
11:41:04
|
 Subject: transmission 95 dakota
IP: Logged
Message:
alright i got a 95 dakota 4x4 with the 318. the transmission is about to go and i have replaced one before, but the question i have is since the truck is an automatic is it possible to convert it over to standard. if so how difficult would that be and would it end up effecting the performance of the truck. thanks
|
gen1dak
Dodge Dakota
JOIN HERE
2/15/2006
12:32:38
|  RE: transmission 95 dakota
IP: Logged
Message:
Most of the time, an automatic-equipped engine isn't ready for a stick. Mopar was better about drilling the cranks on the Magnum engines, but even when they did, it's a rough finish, meaning, while the crank may have been rough drilled, it's not quite ready to accept a pilot bushing that you will need when using the stick. So, you'll need to do that.
These guys can offer help.....
http://www.keislerauto.com/mopar/dakota.html
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
