| From | Message |
Keith
Dodge Dakota
JOIN HERE
12/26/2005
12:14:48
|
 Subject: AC/Heater fan 90 Dak
IP: Logged
Message:
Help! The AC/Heater fan quit on my 90 Dakota. It's cold out there without heat... The fuse is good, all the other accessories on that power strip in the fuse box (fuses 1, 2, and 3--the heater is #4) work fine. I don't know where the heater fan is on these things. It's not out in the open on the firewall like it is on every GM I've owned....
Keith
'90 3.9 Dodge Dakota
|
Super bee
GenI
12/26/2005
21:42:08
| RE: AC/Heater fan 90 Dak
IP: Logged
Message:
pass side, inside the truck under the dashboard
to remove it you will most liekly have to take out the dash
ive ahd my dash apart but ddint change out the fan/ heater core
1990 sport RC SB, 1995 318drivetrain, 3.92 gears (came with truck) 95 dash/steering wheel, hearthrob exhaust, headers, cutout after y-pipe, necessary electric fan add-a-leafs, 30x9.5 mud tires, cranked T-bars, AR 39 15x8 rims, grill guard, roll bars
|
Keith
Dodge Dakota
JOIN HERE
12/26/2005
21:52:57
| RE: AC/Heater fan 90 Dak
IP: Logged
Message:
Ouch. Guess I gotta wait until my other car gets back from the shop so I have something to drive while I'm tearing this one apart. Take out the dash???!!! Man...
Anyway, thanks for the quick reply.
Keith
|
Dennis
Dodge Dakota
JOIN HERE
12/27/2005
23:58:52
| RE: AC/Heater fan 90 Dak
IP: Logged
Message:
I wouldn't be too quick to take out the dash. There is a blower motor resistor that is a weak link in the system. If you look on the firewall under the hood, on the passenger side, you'll see a plastic square with a wiring plug on it, held to the firewall by two screws. Take it out, and I'd almost bet you'll see a burned wire in it. New resistors are around fifteen bucks I think, but if you have a soldering gun and a little time, you can resolder the burned wire to another point on the same strip and it will work like new.
|
Keith
Dodge Dakota
JOIN HERE
12/28/2005
08:41:32
| RE: AC/Heater fan 90 Dak
IP: Logged
Message:
Now that's interesting. I'll give it a try before tearing into the underside of the dash...
Keith
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
