| From | Message |
Justin
Dodge Dakota
JOIN HERE
10/25/2005
21:27:22
|
 Subject: Name the engines!
IP: Logged
Message:
that will fit daks! looking to swap my v6 for a big v8 and the 5.9 magnums are hard to come by for a cheap price...something more common...will the chevy 350 fit? or something like that?
|
Adam
Dodge Dakota
JOIN HERE
10/25/2005
22:16:20
| RE: Name the engines!
IP: Logged
Message:
I am very sorry u asked that. One of 2 things are going to happen...no one will answer u..or they will flame u for even thinking of putting a chevy engine in a dodge. Tisk Tisk.
|
toolfan
Dodge Dakota
JOIN HERE
10/25/2005
22:23:02
| RE: Name the engines!
IP: Logged
Message:
yes a chevy 350 will fit. you stupid f&*king a$$hole just be like the rest of them. lol
if you are going to do that put in a chevy 383 and stroke it.
better yet put in a 440ci those aren't hard to find my uncle sells them.
all you need is a sawsall to make it fit.
|
Super bee
GenI
10/26/2005
00:42:33
| RE: Name the engines!
IP: Logged
Message:
almsot any engine can fit
340, 360, 383, 400 (ask intense), 426, 440, and almost any other engine in between
what ones swap in easy
318, 360
|
daveshotdako
GenIII
10/26/2005
09:29:03
| RE: Name the engines!
IP: Logged
Message:
toolfan, just so that you know, a 383 is a stroker. it is a 350 block with a 400 crank in it. im not flamming ya, just letting you know.
GET IN, SIT DOWN, SHUTUP, AND HOLD ON
custom 48mm tb, tps @ .768, relocated IAT, 180 t-stat, autolite double platinum, taylor wires, flowmaster 40 delta flow single in/dual out, CAI
|
intensedak39
*GenIII*
10/26/2005
11:16:14
| RE: Name the engines!
IP: Logged
Message:
ya beat me to it dave.. a 383 is the stroker, you dont stroke the 383..
unless of course that 383 is a mopar B engine and you put a 440/413 crank in it and make it 426 cubic inches.
|
4.7onN2O
Dodge Dakota
JOIN HERE
10/26/2005
16:01:47
| RE: Name the engines!
IP: Logged
Message:
I love 383s. Thats what I have in my firebird. Tourque monsters. I believe the 355 can be made faster in the quarter though. They for some reason seem to be able to take more abuse.
|
toolfan
Dodge Dakota
JOIN HERE
10/26/2005
16:11:51
| RE: Name the engines!
IP: Logged
Message:
i don't know everything.
know if you stroke a 350 is it consided a 383?
|
intensedak39
*GenIII*
10/26/2005
17:19:27
| RE: Name the engines!
IP: Logged
Message:
yes, you can stroke a 350 sb with a 400 sb crank and get a 383.
but what you said was get a 383 and then stroke it.
|
toolfan
Dodge Dakota
JOIN HERE
10/26/2005
17:27:33
| RE: Name the engines!
IP: Logged
Message:
"when they say 383 stroker" it's just a 350 with a 400 crank?
if you put a 360 crank in a 318 what does that give you?
i know i was wrong, man i am useless
|
intensedak39
*GenIII*
10/26/2005
18:12:41
| RE: Name the engines!
IP: Logged
Message:
it would get you a 344 cubic inch motor on stock bore.
|
318 4x4
Dodge Dakota
JOIN HERE
10/26/2005
21:26:22
| RE: Name the engines!
IP: Logged
Message:
don't forget the 273 and especially the 340
|
Mopar318
Dodge Dakota
JOIN HERE
10/26/2005
22:35:44
| RE: Name the engines!
IP: Logged
Message:
Could a stock 360 crank be used to stroke a 318 without out dremeling out any of the block. Would the power gain be worth the hassle. The longer stroke would yeild more torque but it would rev slower right?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
