Forseti
Dodge Dakota
JOIN HERE
10/25/2005
16:35:18
|  RE: Light Relay Question
IP: Logged
Message:
When energizing the coil of a relay, polarity of the coil does not matter unless there is a diode across the coil. If a diode is not present, you may attach positive voltage to either terminal of the coil and negative voltage to the other, otherwise you must connect positive to the side of the coil that the cathode side (side with stripe) of the diode is connected and negative to side of the coil that the anode side of the diode is connected. Pin 85 and 86 are your coil. Pin 30 is your common (+12). When the coil of the relay is at rest (not energized), the common terminal (30) and the normally closed terminal (87a) have continuity. When the coil is energized, the common terminal (30) and the normally open terminal (87) have continuity.
|
