| From | Message |
dave987654321
Dodge Dakota
JOIN HERE
10/19/2005
11:31:36
|
 Subject: all brake lights out
IP: Logged
Message:
anyone know why all 3 wouldnt work if the fuses are okay and the bulbs
|
Jeremy
Dodge Dakota
JOIN HERE
10/19/2005
11:36:39
| RE: all brake lights out
IP: Logged
Message:
do you have voltage getting to the fuse? if no you could have an open in the wiring before the fuse. if there is, check that it is getting to the bulbs. then check grounds.
|
OBIO3
Dodge Dakota
JOIN HERE
10/19/2005
23:59:33
| RE: all brake lights out
IP: Logged
Message:
Brake light switch on brake pedal
|
Dave987654321
Dodge Dakota
JOIN HERE
10/20/2005
00:30:03
| RE: OB103 and jeremy
IP: Logged
Message:
i figured it might be the brake switch on the pedal because all of the other lights worked in the back which are connected to the same groun, which would only leave the harnesses and all 3 wouldnt go bad at once, soo, i dont know how to replace it though because it says do not re install
|
GB2000
GenIII
10/20/2005
01:43:14
| RE: all brake lights out
IP: Logged
Message:
I had my brake pedal switch go out... easy but a pain in the ass to replace. In order to do it, it requires the use of 3 arms in a space where only 1 will fit comfortably. ...so you're gonna have to use your head...for more than just thinking.
https://www.1stchryslerparts.com/oe_parts_catalog.html Around $15 from here...and I highly recommend them for OEM parts. They're much cheaper than going to your local dealer and shipping is normally really fast.
Electrical -> Chassis Electrical -> Switches -> Stoplamp Switch
Josh Blackshire - Founder, OhioDakotas.NET
Red 98 Dakota Sport - Check it out!
|
GB2000
GenIII
10/20/2005
01:53:42
| RE: all brake lights out
IP: Logged
Message:
From my Haynes manual...this is for a gen 3.
Josh Blackshire - Founder, OhioDakotas.NET
Red 98 Dakota Sport - Check it out!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
