| From | Message |
Idakota
Dodge Dakota
JOIN HERE
9/27/2005
13:50:20
|
 Subject: Anyone used this leveling kit?
IP: Logged
Message:
Saw this on ebay, anyone know if it is legite?
http://cgi.ebay.com/ebaymotors/1997-04-dodge-dakota-durango-2-lift-leveling-kit_W0QQcmdZViewItemQQcategoryZ33585QQitemZ8000468587QQrdZ1QQsspagenameZWD1V
|
GB2000
GenIII
9/27/2005
13:57:59
| RE: Anyone used this leveling kit?
IP: Logged
Message:
Kit includes reindexed torsion bar keys and detail instructions with pictures of install.
It looks to me like the seller is a machinist and custom made a tool either for measuring the height of your torsion bars after you crank them up or made a tool that can crank them up (as a replacement to just using a f'n wrench...or whatever you use for cranking up the t-bars). It looks bogus to me...
Josh Blackshire - Owner, Ohio Dakotas .NET
Red 98 Dakota Sport - Check it out!
|
Idakota
Dodge Dakota
JOIN HERE
9/27/2005
22:44:58
| RE: Anyone used this leveling kit?
IP: Logged
Message:
So they are basically no good to me if I have already cranked my tortion bars?
|
DontBuyPete
Dodge Dakota
JOIN HERE
9/27/2005
23:13:42
| RE: Anyone used this leveling kit?
IP: Logged
Message:
Hey Dumba.ss, there is no e in legit. YOU STUPID DUMB MOTHER F.UCKER!
|
lol
Dodge Dakota
JOIN HERE
9/27/2005
23:58:13
| RE: Anyone used this leveling kit?
IP: Logged
Message:
There is also no "." in the words you are using so what's your point.
|
wantspete
Dodge Dakota
JOIN HERE
9/28/2005
00:06:58
| RE: Anyone used this leveling kit?
IP: Logged
Message:
Hi Pete are you a girl?
|
DontBuyPete
Dodge Dakota
JOIN HERE
9/28/2005
03:57:54
| RE: Anyone used this leveling kit?
IP: Logged
Message:
NO BUT I STILL LIKE A GIANT C*CK IN MY *SS EVERY ONCE IN A WHILE
|
wantspete
Dodge Dakota
JOIN HERE
9/28/2005
07:56:44
| RE: Anyone used this leveling kit?
IP: Logged
Message:
Hi Pete are you a girl?
|
alaskan155
Dodge Dakota
JOIN HERE
9/30/2005
12:00:43
| RE: Anyone used this leveling kit?
IP: Logged
Message:
yeah, if the machinest knows what he is doing,
what a key does is replace the part where the bolt screws into, allowing the t-bars to be cranked more(or less, depending on design), i learned that when i was doing searches on cranking t-bars.
|
JD
Dodge Dakota
JOIN HERE
9/30/2005
22:23:54
| RE: Anyone used this leveling kit?
IP: Logged
Message:
The hex hole is oriented differently than the stock pieces, allowing you to adjust your truck higher without bottoming the adjusting bolt.
If our t-bars were splined at the ends, there would be no need for such a thing, but Dodge does hex ends.
Not bogus, just priced too damn high.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
