| From | Message |
TIP
Dodge Dakota
8/24/2001
00:05:09
|
 Subject: POWERDYNE INTERNAL BELTS
IP: Logged
Message:
I HAVE A FEW POWERDYNE INTERNAL BELTS. YES THE ONE THAT BREAKS OFTEN. POWERDYNE QUIT SELLING THESE TO THE PUBLIC $75.00 EACH + $5.00 SHIPPING VERY LIMITED. I ALSO HAVE A VERY FEW SETS OF BEARINGS FOR POWERDYNES. LET ME KNOW WHAT YOU NEED THANKS...
|
jb
Dodge Dakota
12/16/2001
18:03:53
|  bearings
IP: Logged
Message:
i much do you want for a set of the bearings?
|
tip
Dodge Dakota
12/17/2001
00:07:56
| RE: POWERDYNE INTERNAL BELTS
IP: Logged
Message:
I GET $75.00 A SET FOR ALL FOUR BEARINGS. THEY ARE THE SAME BEARING POWERDYNE USES. THANKS
|
bernd
*GenIII*
12/17/2001
09:44:33
| RE: POWERDYNE INTERNAL BELTS
IP: Logged
Message:
Caution on the belts though...not every Powerdyne uses the same belt. The belts are built by Gates (under license from Powerdyne - they own the patent on them) but come in four different widths. This is due to internal clearances on the blower which requires slightly different width belts. Powerdyne measures the clearance and then installs the belt. You can try them (I did - thanks Tip, finally got them - whew) but be very careful with the width. If the belt is too wide, it'll shred itself under load. If the belt is too narrow, it'll move back and forth on the gears causing excessive stretch and premature failure.
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.65 @ 95.01mph
|
Remil
Dodge Dakota
12/17/2001
22:01:50
| RE: POWERDYNE INTERNAL BELTS
IP: Logged
Message:
If powerdyne quit selling them to the public and they break quite often then where would you get them. How long do the belts last between changes. I want to know because I want to get the powerdyne blower soon.
|
bernd
*GenIII*
12/18/2001
01:24:25
| RE: POWERDYNE INTERNAL BELTS
IP: Logged
Message:
Powerdyne quite selling them to the public due to the fact which I just explained. One size doesn't fit all (or even "like" blowers).
Mine's been on there for over a year now without any issues. Others have been on just about as long and some have broke prematurely. Powerdyne will replace them if the blower is still under warranty. (Or, you can send it in and you'll pay about $150-$200 for the belt replacement and general "overhaul"...$450 with a new impeller.)
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.65 @ 95.01mph
|
Ruben
Dodge Dakota
JOIN HERE
8/26/2002
17:08:08
| Surpanten Belt
IP: Logged
Message:
If I want to change my belt by myself on a Dackota 2.5 pick up? In order to release the belt which bolt do I loosen? The one that holds the pulley or the little one behind and to the left that looks like it swivells? Please Help.
Thanks
|
powerdynebelt
Dodge Dakota
JOIN HERE
1/29/2003
15:15:26
| RE: POWERDYNE INTERNAL BELTS
IP: Logged
Message:
i have powerdyne internal belts for 50.00 each a less if you buy more than one and the belts are extra strong here is my website it has pictures of the belts,prices,etc http://www.geocities.com/mrprogs/Belts.html
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
