Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
03:42:14 - 12/24/2024

General Dakota Board
FromMessage
PITAdak
Dodge Dakota
JOIN HERE


7/18/2005
13:15:56

Subject: Power window
IP: Logged

Message:
Went to lower the passenger window ( at least it's the passenger window ) on my 98 yesterday and it came off the track or something. Was able to get it back up but I still need to fix it. Too hot here right now in AZ to take it apart & see what broke. If someone else has had this problem I would like to know what it is. Thanks in advance.



Luc
Dodge Dakota
JOIN HERE


7/18/2005
13:41:07

RE: Power window
IP: Logged

Message:
yeah i got a 99 and from them going up and down for 80,000 miles they bend themselves out of alighnment . so just take the panel off and check it out its easy. i got them both working like new in less than an hr. and i've never messed with pw before so you can do it too. have you installed any speakers lately? the dumbass at best buy was too rough with the instalation and bent the track after i fixed it , i was pissed.



Izzy
Dodge Dakota
JOIN HERE
 Email

7/18/2005
19:23:51

RE: Power window
IP: Logged

Message:
Yea, I have been there too, am going through it again.



GraphiteDak
GenIII
 Email User Profile


7/18/2005
20:35:30

RE: Power window
IP: Logged

Message:
I posted something a week or so ago about mine. It broke the cable hook on mine.

Cheap engineering. However, I've abused my truck a little when I took it offroad a few times... :p







Mason
Dodge Dakota
JOIN HERE


7/19/2005
00:45:18

RE: Power window
IP: Logged

Message:
I was in a wrecking yard just last weekend, getting some parts and special pieces for a future project, and I noticed a (severely) wrecked '98 RT's electric window does not use a cable/winch setup, it uses a kind of scissors mechanism. Looks to have a bit more stout than that cable thingy. Might be worth a check to see if that type mechanism will fit in place of the winch type electric window mechanism.



shdow
Dodge Dakota
JOIN HERE
 Email

7/19/2005
03:04:42

RE: Power window
IP: Logged

Message:
I hope mine has old style scissor



Izzy
Dodge Dakota
JOIN HERE
 Email

7/19/2005
09:29:13

RE: Power window
IP: Logged

Message:
I just bought an aftermarket scissors type replacement for my drivers door on Ebay from a company that sells out of California. The company is called CarParts Wholesale and their website is www.carpartswholesale.com

The one I bought was listed on Ebay and I got it for $22 but its on their website as something like $50

Try this:
http://www.carpartswholesale.com/cpw/index.html?cat=280&year=2000&make=DODGE&model=DAKOTA



Izzy
Dodge Dakota
JOIN HERE
 Email

7/19/2005
11:09:50

RE: Power window
IP: Logged

Message:
Here it is again on Ebay.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&category=33706&item=7987811139



Josh
Dodge Dakota
JOIN HERE


7/19/2005
14:20:57

RE: Power window
IP: Logged

Message:
Those are the manual crank type.



Izzy
Dodge Dakota
JOIN HERE
 Email

7/20/2005
14:47:26

RE: Power window
IP: Logged

Message:
my first replacement was from a hand crank one. I just had to bolt my electric motor onto it and over the gears and viola, it worked. Its the bent tracks or bad weatherstripping that is destroying my regualtor hardware. I replaced it all once alredy but started having the problems all over again after about a year.



Daksport
Dodge Dakota
JOIN HERE
 Email

7/21/2005
21:33:04

RE: Power window
IP: Logged

Message:
Does anyone have a pic of how the stock one, looks mounted on the door? ive got most of the pieces i need and would like a visual before i attempt it.

Thanks



Izzy
Dodge Dakota
JOIN HERE
 Email

7/26/2005
10:30:12

RE: Power window
IP: Logged

Message:
Mounted on the door pic would be hard since its inside the door frame.

And I stand corrected on the manual vs. power regulator setup. I was told my first replacement was from a manual setup but after receiving my replacement from the site I listed above, its obvioulsy not the same as the power setup.

Not having any luck finding a power window regulator online except for RockAuto who wants upwards of $80 for it with a new motor too. Was hoping for a somewhat cheaper price considering I have been through 2 already (stock and used replacement).



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.