Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
03:42:06 - 12/24/2024

General Dakota Board
FromMessage
jb
Dodge Dakota
JOIN HERE
 Email

6/17/2005
23:42:37

Subject: clunky front end, any ideas on a fix????
IP: Logged

Message:
I own an 02 qc 4x4 that has about 80 k on it. The front end has been clunking intermitantly when driving over uneven road for a while and im flat fed up with it and im trying to find a fix and i need some ideas. I have gone over the whole thing time and time again and everything is tight, i also had it checked by a front end guy and he cant find anything either. Lets see here is a list of parts that have been replaced with zero change in the clunk. Ball joints ( all 4) replace with moogs, outer rod ends, upper control arm bushings, shocks, rack buchings, intermediate shaft, outer rod ends, sway bar bushings( all 4). Any ideas on what else to look at? When the clunks happen its when i hit a bunch of small bumps in succession, its really bad on any type of dirt road thats not smooth. Its really pops and sounds like something is loose but i for the life of me cant find it. HELP!!!!!



bigdave
Dodge Dakota
JOIN HERE
 Email

6/18/2005
16:13:18

RE: clunky front end, any ideas on a fix????
IP: Logged

Message:
check wheel bearings, I went through the same thing, it was my Pass side bearing.



Thomas
Dodge Dakota
JOIN HERE
 Email

6/18/2005
18:50:37

RE: clunky front end, any ideas on a fix????
IP: Logged

Message:
This should fall under the Dakota recall by dodge to replace the front end upper ball joints.



jb
Dodge Dakota
JOIN HERE
 Email

6/19/2005
21:49:04

RE: clunky front end, any ideas on a fix????
IP: Logged

Message:
Bigdave,thanks. the berings feel tight but maybe i need to take a better look at them.

Thomas, its not the ball joints i can assure you. I replaced both the upper and lower ball joints less then 10k miles ago with moog( read much better then stock junk) ball joints.



John K
Dodge Dakota
JOIN HERE


6/20/2005
08:03:12

RE: clunky front end, any ideas on a fix????
IP: Logged

Message:
CV joints maybe? Or the half shafts in the front diff -seen a few posts on these issues.



Lurkin
Dodge Dakota
JOIN HERE


6/20/2005
14:42:04

RE: clunky front end, any ideas on a fix????
IP: Logged

Message:
Don't forget the steering rack and the intermediate shaft.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.