| From | Message |
blue91272
Dodge Dakota
JOIN HERE
6/17/2005
18:06:38
|
 Subject: Stearing Knuckle replacment
IP: Logged
Message:
Hi,I,m replacing the drivers stearing knuckle because my brake caliper holes are stripped.I need to what torqe to tighten the tie rod ends and stuff to.Anyone know that has done this before.Gonna heli coil old one and save it for later sure it will be needed down the road.Thanks Brian
|
John K
Dodge Dakota
JOIN HERE
6/18/2005
00:18:51
| RE: Stearing Knuckle replacment
IP: Logged
Message:
The tie rod ends on a 2000 4x4 should be torqued to 65 ft. lbs.
Lug nuts should be 85-115 ft. lbs.
No idea what the ball joints should be torqued to.
That's the only info I've got on the two pages I copied from the factory manual.
good luck
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
