timberwolf
GenIII
5/04/2005
14:55:19
|  RE: Fog light issues
IP: Logged
Message:
You'll need a multimeter or a simple voltage tester to check it. Turn the switch on and apply the meter to the terminals that hook to the light. If you have voltage, the lights are bad. If not you probably have a blown fuse or bad switch. You can look at the fuse and if the "u" shaped metal inside the glass isn't broken, the fuse is good. If you have a meter you can do continuity testing on the lamps, fuse, and switch to diagnose your problem. One problem I had on mine was that one of the wires leading to the lamp was corroded. I cut out the bad wire and soldered in new.
|
