| From | Message |
grease monkey
Dodge Dakota
JOIN HERE
4/03/2005
14:18:38
|
 Subject: Greasing front end.
IP: Logged
Message:
I had a quick look under the engine compartment around the steering components and didn't see any grease nipples. What, if anything should I be greasing? I know the ball joints are sealed so what else is under there?
|
grease monkey
Dodge Dakota
JOIN HERE
4/03/2005
14:22:14
| RE: Greasing front end.
IP: Logged
Message:
It's an '04 4.7.
|
BD
Dodge Dakota
JOIN HERE
4/04/2005
09:29:23
| RE: Greasing front end.
IP: Logged
Message:
inner & outer end links, pitman, idler arm, if equipped, drive shaft u-joint, and front diff drve shaft if equipped. Spray silicone lube on sway bar bushings if they are not fitted with zerks, also spray cab bushings, door hinges, hood hinges and latch assembly, and service the tailgate. Are you certain your ball joints are sealed? Wipe each one down good witha shop towel and feel for the grease zerk
|
?
Dodge Dakota
JOIN HERE
4/04/2005
11:07:46
| RE: Greasing front end.
IP: Logged
Message:
Welcome to the " lubed for life " world..
Problem is , Whose or What life ?????
Maybe they will go back to leaving us at the
mercy of the ' lube technicians ' !!??
|
JES
Dodge Dakota
JOIN HERE
4/04/2005
14:48:23
| RE: Greasing front end.
IP: Logged
Message:
I've looked everywhere under my '02 QC AWD. Not a single zerk fitting under there anywhere. Welcome to the world of disposable trucks. Damn Japanese crap!!!!!
Eric -- http://photos.yahoo.com/jes_96
|
Figols
Dodge Dakota
JOIN HERE
4/04/2005
14:53:42
| RE: Greasing front end.
IP: Logged
Message:
Unfortunately no grease fittings on '00-up Dakotas.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
