Forums
Forum Tools
|
 |
01:32:38 - 12/20/2024
General Dakota Board
| From | Message |
brianl
GenIII
 
3/14/2005
08:23:22
|
 Subject: Akron area shop
IP: Logged
Message:
I am planning on getting new gears for my truck and wanted to know if anybody in the Akron/Canton/Cleveland Ohio area could recommend a reputable shop to do the work? It's tough to find a shop you can trust now-a-days.
Thanks,
Brian
Dynomax UltraFlo, V8 TB, Alpine 6-disc, 180 T-Stat, PA 3" Lift, Prothane bushings, Autolite 3923, homemade intake, Rancho RS9000, Tonneau, Herculiner Sprayed-In, 33" Dueler A/T, AR Baja 16x8 Wheels, MOOG Balljoints and Ties, Powerslots w/ Raybestos PG pads
|
Dan M
Dodge Dakota
JOIN HERE
3/14/2005
10:40:13
|  RE: Akron area shop
IP: Logged
Message:
I can't help you out with akron, but I found a good shop here in the Atlanta area via Jasper Engines. Might be worth a shot for you to check. This place is listed on jasper's website as a preferred installer. I had some issues with my truck and was told by one shop that they didn't know what was wrong, but might as well just get a new engine. This after being told by 2 shops that they couldn't find any issues. I had that jasper engines shop check it out for me (they did it for free after about a 30 minute discussion with the owner on the phone explaining situation), they are very knowledgeable, friendly , always try to save me money and do great work. And they told me i didn't need a new engine :D
I've been going to them for everything I don't do myself since.
- Dan M
|
brianl
GenIII
3/15/2005
10:44:35
| RE: Akron area shop
IP: Logged
Message:
Cool...thanks for the recommendation. I'll check them out to see if they are local.
Brian
Dynomax UltraFlo, V8 TB, Alpine 6-disc, 180 T-Stat, PA 3" Lift, Prothane bushings, Autolite 3923, homemade intake, Rancho RS9000, Tonneau, Herculiner Sprayed-In, 33" Dueler A/T, AR Baja 16x8 Wheels, MOOG Balljoints and Ties, Powerslots w/ Raybestos PG pads
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
