| From | Message |
trip5981
Dodge Dakota
JOIN HERE
3/04/2005
01:31:25
|
 Subject: Transmission bolts
IP: Logged
Message:
I have recetly replaced the transmission in my 98 dodge dakota with a 318 engine.
The problem I am having is the bolts that hold the torque converter to the flywheel continue to work loose and cause this terible rattleing sound. I have tried getting new bolts thinking the old ones might be worn out, and I even put lock tight on all of them prior to putting them in, however no luck. You guys on here where a big help in the past so i figured I will try this again. Thanks in advance for any input.
|
Deep Purple
*GenIII*
3/04/2005
06:36:09
|  RE: Transmission bolts
IP: Logged
Message:
You might check if you might have USA and metric bolts mixed up. Be sure to use number 8 bolts or better. Good luck
|
trip5981
Dodge Dakota
JOIN HERE
3/09/2005
15:03:32
| RE: Transmission bolts
IP: Logged
Message:
another quick question.
Other people have said something about metric and standard bolts. I used the bolts that were in the torque converter when I changed the trans. I thought maybe they were worn out and thats why they were working loose, so I bought some new ones from a transmission shop. My question is, is it possible that the remanufactured transmission I put in have metric threads and the one I took out have had standard?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
