| From | Message |
Brett
Dodge Dakota
JOIN HERE
3/01/2005
23:11:16
|
 Subject: horsepower
IP: Logged
Message:
Just want to know if anybody knows the horsepower rating for a stock Dakota sport with a 318? 1997 if it matters 2wd
|
Almost
Dodge Dakota
JOIN HERE
3/01/2005
23:52:13
|  RE: horsepower
IP: Logged
Message:
Not quite enough.
Always.
Not quite enough.
|
kris
Dodge Dakota
JOIN HERE
3/02/2005
00:04:14
| RE: horsepower
IP: Logged
Message:
Know the '95 318 was rated at 235hp (@ 3200 rpm if i remember correctly) not sure but i think they were downrated in '96 to 230 @ 3200
|
lollilust101
Dodge Dakota
JOIN HERE
3/02/2005
02:49:21
| RE: horsepower
IP: Logged
Message:
I have a stock 318, I have upgraded the plugs and wires and am installing a K&N FIPK cold air intake! I was wondering what other easier mods I can do to increase this number??
|
lolli is
Dodge Dakota
JOIN HERE
3/04/2005
00:03:44
| RE: horsepower
IP: Logged
Message:
port throttle body. headers and exaust, eather a 2.5'' y pipe into a 3'' collector , muffler. or true 2.5'' duals with an X pipe
remove the air temperature sensor from the intake manifold, plug the hole in the intake with 1/2" brass pip[e plug. then put it in a drilled hole on your cold air intake. then remove the flywheel trigger relay. its behind the passenger head, just unplug it and two bolt hold it on and file or dremmel the holes into a slotyou want it psitioned so that you can push the crank sensor towaqrd the oil pump(youll also have to remove the rubber plug that the sensor was in. pushing the crank sensor toward the oil filter advances the timing
|
Rick3
Dodge Dakota
JOIN HERE
3/04/2005
03:06:01
|  RE: horsepower
IP: Logged
Message:
Horsepower 230 @ 4400 RPM
Torque (lb-ft) 300 @ 3200 RPM
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
