| From | Message |
dakondubbz
Dodge Dakota
JOIN HERE
2/26/2005
16:09:23
|
 Subject: ram charger help
IP: Logged
Message:
im fixin 2 buy my uncles ram charger for 1500bucks. 85, auto, 5.2. does ne one know what tranny is in that model. oh yeah its carbed. also how much or would i need to lift it to fit 33 x 12.50's on it
|
Chris
Dodge Dakota
JOIN HERE
2/26/2005
23:35:28
|  RE: ram charger help
IP: Logged
Message:
im pretty sure it has a 727 torqueflite in it. my dad has a 87 ram charger and thats what he has in his.
|
b1llyw
GenIII
2/27/2005
07:05:50
|  RE: ram charger help
IP: Logged
Message:
Check out this site:
http://www.ramchargercentral.com
All you need to know.
Bill White - KRC Performance
'02 QC, 4x4, 4.7, 5spd stick, 3.55 LSD, Leather
|
vern
Dodge Dakota
JOIN HERE
2/27/2005
08:20:32
| RE: ram charger help
IP: Logged
Message:
depends,2wd or 4wd,towing package or not etc etc
its either a 904 or 727,
if you get under the truck,looking at the trans pan,pass side ware the drip stick goes in,if it has a bulges out there then its a 727,
if it is a straight sided pan there its a 904
|
Eric P
Dodge Dakota
JOIN HERE
2/27/2005
19:32:11
| RE: ram charger help
IP: Logged
Message:
The tranny is definately a 727 torqueflite and you need 3-4" of lift to clear the fenders. I had the same year ramcharger and that's pretty much the what it takes for 33's. You might be able to get away with putting add-a-leafs front and rear but it'll be a tight fit. I also had some axles laying around with 3.73 gears and that seemed to be great for mixed trail and street driving. That is compared to the stock 3.21's. Hope this helps. Oh yeah the edelbrock cam and intake set for the 318 works wonders for that motor realy wakes it up. Headers are also inexpensive for those trucks. Good luck.
|
dakondubbz
Dodge Dakota
JOIN HERE
2/28/2005
02:54:09
| RE: ram charger help
IP: Logged
Message:
does that year have a removable hard top
|
gen1dak
Dodge Dakota
JOIN HERE
2/28/2005
20:18:47
| RE: ram charger help
IP: Logged
Message:
1978 was the last year for the removable top....if memory serves.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
