From | Message |
dak287 Dodge Dakota JOIN HERE
2/26/2005 12:48:32
|
Subject: valve springs IP: Logged
Message: im gonna change the valve springs in my 4.7 and how much psi would it take to hold the valves up?
|
vern Dodge Dakota JOIN HERE
2/26/2005 14:21:03
| RE: valve springs IP: Logged
Message: since you did,nt give any other info for what!
a pound of spring pressure will wholed the valve up.
hope that helped
|
.boB Dodge Dakota JOIN HERE
2/26/2005 16:12:55
| RE: valve springs IP: Logged
Message: More is better. They will stay in with as little as 20 psi. But 120 psi will hold a lot better.
|
Vern Dodge Dakota JOIN HERE
2/27/2005 09:27:37
| RE: valve springs IP: Logged
Message: Your an a-ss
|
.boB Dodge Dakota JOIN HERE
2/27/2005 12:46:48
| RE: valve springs IP: Logged
Message: Explain the logic underlying that conclusion.
|
dak287 Dodge Dakota JOIN HERE
2/27/2005 20:57:39
| RE: valve springs IP: Logged
Message: vern im swapping cams@valve springs. every time anyone i know thats done valve springs had the shop do it for them becouse they were having the heads redone. and i talked to a guy who did a ford torino 429 and he said he pumped his up to 160 psi on a old pump and as soon as he released the spring the air came out. he said he dosn't know what happend? not a big problem for him he had been in that motor more than the oil. thats actually a sad story he redid the whole motor and before he got to break the motor in someone totalled it.
but anyway thanks ill pump it up to about 150 and that should be good. and if the valve falls down ill get a magnet and a little flashlight and pull it back up.. yeah right huh.. thanks for the help i really would like to not pull the heads off but i just dont know how sinsitive the valve will be with 150psi. thanks again
|
apoligies Dodge Dakota JOIN HERE
2/28/2005 18:44:46
| RE: valve springs IP: Logged
Message: .boB, the comment was not for you it was for vern. It was ment to be Vern, your an ass.
Sorry!
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|