| From | Message |
bob70
Dodge Dakota
JOIN HERE
1/01/2005
19:17:25
|
 Subject: Filling T-Case
IP: Logged
Message:
What do you generally use to fill the Transfer case, not the oil/atf type, but do you use some kind of funnel? or special spout? I can't comfortably fit any atf bottle. Thanks for any tips you may have.
|
Kaderdak
GenIII
1/01/2005
19:43:41
| RE: Filling T-Case
IP: Logged
Message:
Hehe, it's pretty tricky. I improvised once and used a baby bottle. Cut the tip of the nipple off and poke a small hole in the bottom for a breather while you are using the bottle as a spout. Plug the hole in the bottom with one finger, fill up the bottle with atf, put the lid/nipple back on, and turn it upside down real quickly into the fill hole. If that makes any sense.
|
Dex
Dodge Dakota
JOIN HERE
1/01/2005
21:00:52
| RE: Filling T-Case
IP: Logged
Message:
Go to Pep Boys - they have a pump that you can put inside your bottle and pump it in with the tube that comes with it.
Bring the bottle you want to use to make sure it will fit.
It works I did it.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
