| From | Message |
Ron
Dodge Dakota
JOIN HERE
12/16/2004
09:56:41
|
 Subject: Belt to Bypass Frozen Compressor
IP: Logged
Message:
I need to bypass the frozen compressor on my 99 3.9 Dakota. Does anyone know the size belt or part number?
|
ZoSoAir
Dodge Dakota
JOIN HERE
12/16/2004
11:18:52
|  RE: Belt to Bypass Frozen Compressor
IP: Logged
Message:
Any good parts store will be able to tell you.
|
Ron
Dodge Dakota
JOIN HERE
12/16/2004
12:12:02
| RE: Belt to Bypass Frozen Compressor
IP: Logged
Message:
It is not the belt for a non A/C truck. That one is too small.
|
Dan M
Dodge Dakota
JOIN HERE
12/16/2004
12:30:27
| RE: Belt to Bypass Frozen Compressor
IP: Logged
Message:
I saw a belt advertised somewhere that was adjustable. I can't remember how it was made ,but it was adjustible so you can use it for any vehicle. It could have been napa, advance, autozone or pep boys. Sorry i can't remember the exact location.
- Dan M
|
ROD
GenIII
12/16/2004
13:54:32
|  RE: Belt to Bypass Frozen Compressor
IP: Logged
Message:
I've seen this trick used a couple of times to find a belt for a modified engine... take the old belt or a piece of string and run it around the pulleys you want the belt to go around, then measure the total length of the belt or string. It's not going to be right on, but it should get you close enough that you can buy that length belt and maybe one a 1/2 inch or 1 inch longer, then return the one you don't use.
'02 QC AWD 4.7L 4X4 LSD
|
trent
Dodge Dakota
JOIN HERE
12/16/2004
14:23:07
| RE: Belt to Bypass Frozen Compressor
IP: Logged
Message:
unthaw ur compressor with a heat gun
|
Izzy
Dodge Dakota
JOIN HERE
12/16/2004
14:33:37
| RE: Belt to Bypass Frozen Compressor
IP: Logged
Message:
I had to use a belt for a Lexus on my 2000 4.7L motor to bypass the compressor after mine locked up. We had to remove the compressor and use the other belt in place of the 4.7L belt. I do not remember the part # but I did post it on here last Junish. If I can find the belt I'll repost the number and you will need to check to see if it will work for your 3.9L motor or not.
|
Ron
Dodge Dakota
JOIN HERE
12/16/2004
20:10:38
| RE: Belt to Bypass Frozen Compressor
IP: Logged
Message:
The right belt was a 905K7
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
