| From | Message |
00RTRC
Dodge Dakota
JOIN HERE
11/21/2004
18:15:27
|
 Subject: Rear stabilizer bar
IP: Logged
Message:
I have a 2000 RT. I have been noticing that on certain bumps, I get a "thunk" or "clunk" from the rear end. I recently replaced the shocks, so I crawled under the truck to make sure the bolts were still tight. What I found was the the links that bolt the rear stabilizer bar to the frame are occasionally hitting the frame. This is because the bushings in the links have enough slop in them to allow this. What options do I have on replacing the links? Does anyone make replacement bushings for the rear stabilizer bar links? The links themselves look like they're made of plastic! Thanks in advance for your help.
|
matt
Dodge Dakota
JOIN HERE
11/22/2004
05:03:51
|  RE: Rear stabilizer bar
IP: Logged
Message:
me thinks the only possibility is to replace the whole link, check with moog, but I think that dodge is your only option at this time... not definite about that....
|
matt
Dodge Dakota
JOIN HERE
11/22/2004
05:04:43
| RE: Rear stabilizer bar
IP: Logged
Message:
you could swap out to the hotchkiss rear swaybar.... a bit more than the endlinks though!!!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
