From | Message |
JT Unregistered ![Email](http://www.dodgedakota.net/amb/icons/email.gif)
2/01/2001 17:25:28
|
Subject: RIMS IP: Logged
Message: I WAS WONDERING IF ANYONE KWONS IF THE DAKOTA RT RIMS WILL FIT ON A 92 DAKOTA.
|
btt Dodge Dakota JOIN HERE
1/17/2003 22:17:35
| RE: RIMS IP: Logged
Message: btt
|
POWER HUNGRY Dodge Dakota JOIN HERE
1/19/2003 15:07:43
| RE: RIMS IP: Logged
Message: The rears should fit without any problems but I don't think the fronts will. I have seen a gen2 with R/T look a likes on them but I don't know how since 235s rub when at lock on mine. I guess they don't need to turn or have an inch and a half less backspacing? I have been trying to find out the answer for 8 months without any luck. :(
|
Daktrep9298 Dodge Dakota JOIN HERE ![Email](http://www.dodgedakota.net/amb/icons/email.gif)
1/19/2003 15:14:25
| RE: RIMS IP: Logged
Message: American Racing equiptment makes a wheel that looks exactly like the R/T wheel. I have checked pricing too and the ARE wheels are only like $120 a piece brand new for the same size as the R/T wheel.
Hope this helps
Dan
|
blue93v6 Dodge Dakota JOIN HERE ![Email](http://www.dodgedakota.net/amb/icons/email.gif)
1/19/2003 23:40:50
| RE: RIMS IP: Logged
Message: Daktrep9298 i was at the ARE website and i didn't see any rims that look like the r/t rims. But i would like to see them. do you now what they were called. thanks
[]D []-[] [] []_
|
Daktrep9298 Dodge Dakota JOIN HERE ![Email](http://www.dodgedakota.net/amb/icons/email.gif)
1/19/2003 23:55:35
| RE: RIMS IP: Logged
Message: I don't know but I saw them at my local speedshop and I will stop on my way to work tomorrow. I know they were American Racing wheels, or atleast they had that center cap. I will check tomorrow and let you guys know
Thanks
Dan
|
blue93v6 Dodge Dakota JOIN HERE ![Email](http://www.dodgedakota.net/amb/icons/email.gif)
1/19/2003 23:57:28
| RE: RIMS IP: Logged
Message: thanks Daktrep9298
[]D []-[] [] []_
|
Daktrep9298 Dodge Dakota JOIN HERE ![Email](http://www.dodgedakota.net/amb/icons/email.gif)
1/20/2003 10:44:36
| RE: RIMS IP: Logged
Message: I checked with my local speedshop about the wheels. They are called the Estrella but they do not fit the Dakota. Sorry!!!!!
But then the guy tried selling me R/T wheels for $1200 a set. Those people there are MORONS. Oh well, sorry about that guys.
Later
Dan
|
EmeraldV6 Dodge Dakota JOIN HERE
1/20/2003 11:56:13
| RE: RIMS IP: Logged
Message: I see at www.tirerack.com they have some painted rims called "Sport Edition 2105" that resemble the R/T rims that will fit a 92.
|
blue93v6 Dodge Dakota JOIN HERE ![Email](http://www.dodgedakota.net/amb/icons/email.gif)
1/20/2003 13:47:44
| RE: RIMS IP: Logged
Message: the r/t rims at www.tirerack.com ar $185 a rim how much do the r/t rims go for at the dealership? does anyone know the part number?
[]D []-[] [] []_
|
dakdar darryl GenII
![User Profile](http://www.dodgedakota.net/amb/icons/profile.gif)
![](http://www.dodgedakota.net/members/profiles/1307
/thumbnail.gif)
1/20/2003 16:51:11
| RE: RIMS IP: Logged
Message: hey boys the rims do fit!!!
I am running the mopar acessories R/T rims(17x9)with 255/55/17 tires I do haves light rubbing on the frame when wheel is fully turned butit's not that bad. Heres how I did it
To fix the rim clearnce issue I had to grind about 1/4 inch along the entire
top of the A arm to the width of the Rim
Remember that when the truck is on the ground the A arms go up so if it
appears it has enough clearance when you have it on jacks it might not be
enough. to truly check you have to install the wheel take truck of the jack
and compress the shock to make the A arm go up. (compress the shock by
pushing on the fender down) With The R/T rims i also have rubbing on the
frame when turning full lock to lock. It rubs on the plastic inner fender
protector. I think it is well worth it .
To fix the dust cap thing remove rim/dustcap push the cotter pin out of the
way grind down the spindle until you are about 1/8 inch from the holes where
the cotter pin goes through put the dust cap back on pound it down flat with
a hammer
I know this all sounds barbaric but i got all this info from a Mechanic who
owns a 92 with R/T rims who said the A arms will be fine and grinding down
the spindle is OK
FMS injectors, Autolites,clear corners,V8 TB , Pro Comp es9000,Airraid intake with 97 air hat, R/T Rims S-bolt mod, relocated IAT
|
cryppie Dodge Dakota JOIN HERE ![Email](http://www.dodgedakota.net/amb/icons/email.gif)
1/20/2003 17:39:25
| RE: RIMS IP: Logged
Message: Or use 5/16" spacers. No grinding, dust caps fit, and no rubbing. Only drawback is, your local machine shop will have to make you a pair, because nobody sells them. Cost me $20 for the pair. Email me for questions.
cryppie
MODS/TIMES
|
Shane K Dodge Dakota JOIN HERE ![Email](http://www.dodgedakota.net/amb/icons/email.gif)
1/20/2003 20:22:29
| RE: RIMS IP: Logged
Message: I know that R/T rims are 6 lug. I'm not sure if 92 is a 5 lug or a 6
|
blue93v6 Dodge Dakota JOIN HERE
1/20/2003 20:25:14
| RE: RIMS IP: Logged
Message: gen II (91-96) and gen III 97- are all 6x4.5 lug
|
1Flamed92Dak GenII
![User Profile](http://www.dodgedakota.net/amb/icons/profile.gif)
![](http://www.dodgedakota.net/members/profiles/1248
/thumbnail.gif)
1/20/2003 20:54:56
| RE: RIMS IP: Logged
Message: The Dakota R/T rim is 17x9 and it fits a 1992 with a few alterations but nothing major as for using a spacer you could do that but you risk lug failure do to the stress at the base of the Brake Rotor also putting more stress on the wheel bearings.I run the 255/55/17 with only minimal rubbing on the frame rail. Hopefully this helps you out JT PS If you need any advice just EMAIL me. And I'll be glad to help you out.
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|