| From | Message |
stumpy
Dodge Dakota
JOIN HERE
10/07/2004
21:05:30
|
 Subject: Any comments on Gears?
IP: Logged
Message:
I was looking to put in new gears , 4.10 ratio for my 01 R/T, i'm really hoping that they perform as i good as i think they will, well anyways
I never see any posts anout gears so i thought i'd ask, i already did a search but i didnt find what i was looking for on this site (didnt look that long though).
But any comments or advise or experience with new gears preferably the ones i'm talkin about will be greatly appriciated.
Thanks
Stumpy
01 R/T CC.....
|
greyDAK
Dodge Dakota
JOIN HERE
10/08/2004
08:51:09
| RE: Any comments on Gears?
IP: Logged
Message:
what gears do you have right now?
My little v6 has 3.21 gears with my 5 speed. I have so much low end torque that I can shred my tires in 1st, spin in to second, and occasionally chirp into third. I plan to put in 3.92's in the spring since they are sometimes available from car-parts.com for a good price. I figure with that combo, my little truck will be one awsome sleeper, and tire recycler.
|
Sneezer
Dodge Dakota
JOIN HERE
10/08/2004
11:39:44
| RE: Any comments on Gears?
IP: Logged
Message:
I bought some 4.10s for my 92 CC. Just waiting for somw time to install them. I bought mine from 4wheelparts.com during a gear sale they had last month.
|
stumpy
Dodge Dakota
JOIN HERE
10/08/2004
11:53:42
| RE: Any comments on Gears?
IP: Logged
Message:
Cool, right now I have 3.92 gears in because its a R/T and they come standard with those gears, I was going to upgrade to 4.10 in the spring , i and was probly going to buy them from socaldakota.com
Stumpy
Silver 01 R/T CC....
|
Mike S.
Dodge Dakota
JOIN HERE
10/08/2004
12:23:16
| RE: Any comments on Gears?
IP: Logged
Message:
Going from 3.92 to 4.10 won't be much of a change. If it were me I'd go with 4.56. Just my 2 cents.
Mike S.
91cc Carbed 390 w/nitrous
97cc Little 6er that could
|
stumpy
Dodge Dakota
JOIN HERE
10/08/2004
16:06:27
| RE: Any comments on Gears?
IP: Logged
Message:
Ya know your right, socaldakota has those too for the same price, me i would get some more power and then put those gears in, i guess i'll have to wait until the beginning of the summer then.
well thanks for the posts
Stumpy
Silver 01 R/T CC....
|
RaZoR1
Dodge Dakota
JOIN HERE
10/08/2004
19:08:26
| RE: Any comments on Gears?
IP: Logged
Message:
What would you guys recomend for a 4.7 auto with 355's. I have a blower on it already and want to get my 60 foot times down but i also drive it every day. I was thinking the 392's but are the 410's not that bad?? I don't want to be sitting at 3000rpm at 100km on the highway.
|
GraphiteDak
GenIII
10/08/2004
20:02:37
| RE: Any comments on Gears?
IP: Logged
Message:
I'm going to swap my 3.55's out for 4.10's when I get the chance.
I've calculated the speed vs. RPM's a few times. With 4.10's and the tall OD gear in the newer 5-45RFE tranny you will still be sitting pretty low for RPM's in OD. Some guy in here threw in 4.56's in his 4.7 auto and loves them.
Click on my banner below. Then look down the page. I have a link to a 4 wheel website that has gear calculators.
|
01Motorsport
Dodge Dakota
JOIN HERE
10/08/2004
21:59:15
| RE: Any comments on Gears?
IP: Logged
Message:
I have 3:92 behind a 4.7 5-speed. The stock tire diameter was 29", but I went with a R/T 17x9 with 255/55/17 setup, and speedometer correction (28"). 2500 rpm = 72 mph now.
|
stumpy
Dodge Dakota
JOIN HERE
10/08/2004
22:51:16
| RE: Any comments on Gears?
IP: Logged
Message:
The superchips tuner will help to tune for yires and gear, but they dont make one for the 4.7L engine sorry guys, looks like i'm getting one seeing how i have an R/T
stumpy
Silver 01 R/T CC.....
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
