| From | Message |
QQQ
Dodge Dakota
JOIN HERE
9/10/2004
18:00:47
|
 Subject: 45RFE PO700 Code
IP: Logged
Message:
2000 4.7 60,000 miles. Anyone have any experience with this code? Are there any easy fixes? Or things to check for? Transmission is in limp mode. I tried to reset computer, (was going to do so anyway, cleaned bat terminals, ground wire) Seems that code isn't clearing. Any suggestions appreciated.
|
QQQ
Dodge Dakota
JOIN HERE
9/14/2004
13:32:25
| RE: 45RFE PO700 Code
IP: Logged
Message:
Update, took it to autozone to have codes read. PO720 output speed sensor circuit malfunction.
After reading up on PO700, I suspected there were codes not showing up after PO700 is tripped. DTC codes as opposed to OBD2 codes. Autozones code reader picked it up. Although it didn't show PO700.
|
QQQ
Dodge Dakota
JOIN HERE
9/15/2004
18:28:58
| RE: 45RFE PO700 Code
IP: Logged
Message:
Fixed. Was output speed sensor. $39 at dealer. Output speed sensor which plugs into the transmission. Good Luck future searchers.
|
PAUL
Dodge Dakota
JOIN HERE
11/30/2007
16:59:43
|  RE: 45RFE PO700 Code
IP: Logged
Message:
PO700 CODE REPLACED OUTPUT AND INPUT SPEED SENSOR FIXED PROBLEM FOR A FEW DAYS FINALY GAVE UP AND HAD DODGE DIAGNOSE PROBLEM THEY FOUND THE TRANSDUCER SOLENOID WAS BAD
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
