| From | Message |
Izzy
Dodge Dakota
JOIN HERE
8/25/2004
23:29:17
|
 Subject: Error code P1784 ?????????
IP: Logged
Message:
P1784 after fluid/filter change & flush
00 CC 4.7L (45RFE I think) with 98+K miles. Trans has been serviced twice before at 30k & 60K for scheduled maintnence.
I had the fluid & filter changed along with tranny flushed at same time yesterday. When I went to pick the truck up I had a check engine light on.
Their mech was not in to read the codes with a scanner so the parts store up the street ran a scan and came up with P1784 "Manufacturer Control Transmission" as the code. After searching the internet, I came up with it being a code having something to do with First and Reverse but no other real clarification.
Does anyone out there in Dakotaland know what I am up against and/or how it happened....I know it was caused by the service but what part of the service could have caused it?
|
?
Dodge Dakota
JOIN HERE
8/26/2004
08:50:27
|  RE: Error code P1784 ?????????
IP: Logged
Message:
Possible - connector ( at least the connection of ) to a sensor on the tranny was
removed and not reconnected ?
Or accidentally knocked loose ?
|
rosa carbajal
Dodge Dakota
JOIN HERE
11/28/2009
14:03:21
|  RE: Error code P1784 ?????????
IP: Logged
Message:
quisiera saber que significa p1784 manufacturar control transmision ya que me prendio la luz en el tablero y fui al autopartes y me la escaniaron y me digeron que ese codigo era de diler y no me podian decir que era lo que necesitaba la troca
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
