| From | Message |
uberduper
Dodge Dakota
JOIN HERE
8/07/2004
21:39:18
|
 Subject: Powew Window Regulator
IP: Logged
Message:
I need one. The driver side power window regulator broke. The motor is still good as far as I can tell. The 2001 Dakota QC uses a cable system. Steel cable that meets a steel plate that travels on the rail and they connect the STEEL cable to the STEEL plate with a PLASTIC pos. Obviously the plastic bit broke. So I *only* need that plate that slides on the rail (the plastic connector is pressed into the plate) and not a whole regulator kit. Dodge wants to sell me an entire kit that I presume includes the motor. They want a small fortune for it.
I've seen on eBay some regulator kits for the Durango. The price is right at $65, but would a durango kit work in the dakota? All I need is that one little plate to work.
If any of you happen to have this plate, I would love to buy it from you. Please drop me a line at james@uberduper.com if you can help.
Thanks,
James.
|
Mac
Dodge Dakota
JOIN HERE
8/09/2004
07:52:11
|  RE: Powew Window Regulator
IP: Logged
Message:
I just replaced both the regulator and motor on my 01 Quad. I bought both from A1 electric for about $118 on line. It was easy to replaced both at the same time because they are attached and ready to go. Here is the link. http://www.a1electric.com/
|
tim
Dodge Dakota
JOIN HERE
1/10/2006
20:17:35
| RE: Powew Window Regulator
IP: Logged
Message:
My plastic pos also broke. did you have any luck finding just the plate? thanks tim
|
Azdak
Dodge Dakota
JOIN HERE
1/10/2006
21:49:49
| RE: Powew Window Regulator
IP: Logged
Message:
Replaced my plastic pos with a rubber faucet washer quite a while ago. So far, so good.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
