| From | Message |
pipetrain
Dodge Dakota
JOIN HERE
8/03/2004
00:09:11
|
 Subject: rebuilt transmition wont shift into over
IP: Logged
Message:
I have a 89 dodge dakota with a rebuilt transmition and it wont shift to overdrive. does anyone know what the problem can be?
i appreciate any input.
|
Bob Lincoln
Dodge Dakota
JOIN HERE
8/03/2004
09:00:23
| RE: rebuilt transmition wont shift into over
IP: Logged
Message:
Could be lots of causes. Check O/D solenoid and electrical connection.
|
pipetrain
Dodge Dakota
JOIN HERE
8/03/2004
10:36:36
| RE: rebuilt transmition wont shift into over
IP: Logged
Message:
checked connection, don't know how to check solenoid,
rebuilt trans. should be new. could it be the transm. throttle linkage not adjusted right? shifts smooth, just no overdrive. put rebuilt on with new torque converter and put in 5qrts. of fluid and dip stick says full, test drove and around town, checked 20x and still full.
|
lb
Dodge Dakota
JOIN HERE
8/04/2004
17:56:33
| RE: rebuilt transmition wont shift into over
IP: Logged
Message:
any warranty on the tranny?
get it checked out, if its rebuilt it shouldn't be working like a pile of shat.
|
pipetrain
Dodge Dakota
JOIN HERE
8/05/2004
23:27:47
| RE: rebuilt transmition wont shift into over
IP: Logged
Message:
have a code scanner and it's saying vehicle speed sensor problem. speedometer and odometer work fine, is this something different?
|
BD
Dodge Dakota
JOIN HERE
8/06/2004
11:25:07
| RE: rebuilt transmition wont shift into over
IP: Logged
Message:
I had a problem with the OUTPUT SPEED SENSOR in my 99 dakota. It looks like not much more than a plug that goes into the passenger side of the transmission. (This sensor is not to be confused with another sensor that is on the rear differential.)
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
